Neptune Electric

Charging pile industry.

主页 > ENGLISH > PRODUCTS > Charging pile industry. >

NVR6V-150Y download

1. CCCCE and RoHS compliant；

2. Contacts sealed in ceramic capsules and inert gas；

3. Contacts protected against contamination. e.g oxidation and corrosion;

4. Magnet arc blowout;

5. Coils controlled by PWM (Pulse Width Modulation) to ensure low operation power；

6. Auxiliary contact option;

一、 Product Names and Type Rules

NVR6V

150

750

( )

Product Type

NVR6V： Ceramic

Load Current

150：150A

Series Indicator

Y： Circular Series

Load Voltage

450：450V
750：750V
1000：1000V

Coil Voltage

12：12VDC
24：24VDC
A：9~36VDC

Contact Form

H： 1 Form A of Main Contact
F： 1 Form A of Main Contact + 1 set of Aux. Contact(Default Form A)

Coil Terminal Form

B： Wire + Connector
L： Wire

Load Terminal Form

7： External Thread

Special Code

Customer's special requirements

二、 Coil Data
@-40℃~85℃

Rated Voltage Vd.c.	Coil Type	Operate Voltage Vd.c.	Release Voltage Vd.c.	Coil Resistance Ω(@23℃)	Coil Power (Approx.) W
12	Single Coil	≤9	≥1.2	28.8(1±8%)	5
24	Single Coil	≤18	≥2.4	115.2(1±8%)	5
9～36V	PWM Internal PWM	≤9	≥3	4.6×(1±10%)	40W (start)
9～36V	PWM Internal PWM	≤9	≥3	4.6×(1±10%)	4W (peek)

三、 Contact Data

Main Contact	Contact Form	1 Form A
	Contact Material	Copper Alloy
	Contact Resistance	≤1.5mΩ (@150A)
	Contact Rating Current	150A(@60mm² Copper bar)
	Max. Breaking Current	2000A/320Vd.c.(1 op)
	Max. Switching Voltage	1000Vd.c.
	Min. Applicable Load	6Vd.c./1A
	Operate Time	≤40ms
	Bounce Time	≤5ms
	Release Time	≤25ms
	Current Endurance	150A / Cont. 180A 2h 225A 15min 400A 60s
Aux. Contact	Contact Resistance	≤500mΩ(@0.1A)
	Max. Carrying Current	100mA
	Min. Applicable Load	6Vd.c./3mA

Current Endurance Curve

Notes:
The ambient temperature is 85℃, and the cross-sectional area of the copper bar is ≥60mm². Supply rated voltage to coil;

The upper limit of the function temperature is 130℃, which is suitable for long-time working; and the upper limit of the safe temperature is 180℃, which is suitable for short-time working; If the temperature exceeds 180℃,the contactor may fail.

四、 Endurance

Electrical Life(Resistivity)	Making	60Vd.c./150A 1×10³(ops)
Electrical Life(Resistivity)	Breaking:	1000Vd.c./150A 1×10³(ops)
Mechanical Life	200,000次(ops)

Notes:
Electrical Life tests are conducted in room temperature. Supply rated voltage to coil. On/off ratio is 0.6s:5.4s;

Mechanical Life tests are conducted in room temperature. Supply rated voltage to coil. On/off ratio is 0.5s:0.5s.

The above conditions apply to single coil products.
五、 Other Properties

Insulation Resistance	Between Open Contacts	Before Test: ≥1000MΩ(@1000Vd.c.) After Test: ≥50MΩ (@1000Vd.c.)
	Between Closed Contact and Coil	Before Test: ≥1000MΩ(@1000Vd.c.) After Test: ≥50MΩ(@1000Vd.c.)
Dielectric Strength	（leakage current＜1mA） Between Open Contacts (Leak Current＜1 mA)	Before Test: ≥3000Va.c.,(50/60 Hz, 1min) After Test: ≥2250Va.c.,(50/60 Hz, 1min)
	（leakage current＜1mA） Between Closed Contact and Coil (Leak Current＜1 mA)	Before Test: ≥2500Va.c.,(50/60 Hz, 1min) After Test: ≥1875Va.c.,(50/60 Hz, 1min)
Mechanical Shock-Destructive		50G
Mechanical Shock-Functional		20G
Vibration		10-2000Hz，5G

六、 Configuration
1. Product Model：NVR6V-150Y/xxx-xx-HL7
Without Aux. Contact
1.1. Outline Dimensions

1.2. Wiring Diagram

No polarity on the load and coil

2. Product Model：NVR6V-150Y/xxx-xx-HB7
Without Aux. Contact
2.1. Outline Dimensions

2.2. Wiring Diagram

No polarity on the load and coil

3. Product Model：NVR6V-150Y/xxx-xx-FL7
With Aux. Contact
3.1. Outline Dimensions

3.2. Wiring Diagram

No polarity on the load and coil

Notes：
1) All unspecified tolerance please refer to the following table:

Dimension(mm)	＜10	10~50	＞50
Tolerance(mm)	±0.3	±0.5	±0.8

2) The default product is shipped without connector harness,screws,washers,spring washers and other installation accessories.
七、 Application Condition

Application Condition	Standards Test Condition	Operating Condition	Storage Condition
Temperature	23 ℃±5 ℃	-40℃～+85℃	-40℃～+85℃
Humidity	25%～75%RH	5%～85%RH	5%～85%RH
Altitude	≤2000m	≤4000m	≤4000m
Direction	Same as Installation Direction	Vertical	Forward Packing

八、 Others
1. Please avoid foreign bodies, grease or corrosive liquids in the terminal, otherwise it will lead to abnormal heating at contact terminals.
2. Please avoid installation in strong magnetic field (around the transformers, the magnet) and the heating objects nearby.
3. In order to prevent loosening, please use the washer when installing the relay. Please use the M5 screws to install relay, screw locking torque within 3 N·m～4N·m; Damage may occur when it is beyond the range.
4. Please pay attention to the thickness of copper bars and the value of the torque. If it goes beyond the recommended values in the below table , it will cause thread slide or installation is not tight. To avoid short circuit or fire,it’s not suggest fix two copper bus bar at same side.

Screw on the load terminal	Recommended thickness of copper bus bar	Recommended hole dimension of copper bus bar	Recommended Flatness of copper bus bar	Torque
M8	2~3mm	Ф8.1mm～ Ф8.5 mm	0.1	8N·m～10N·m

5. The rating load of contact is resistive load. Please assure the surge absorption device together with inductive load when using the L/R≥1 ms inductive load (L Load),otherwise it may lead to the decrease of electrical endurance and defective switch.
6. The relay contacts are sealed and filled with gas. When the contact temperature changes, there is internal gas penetrating characteristic.Neputune relays are forbidden to be used at the temperature beyond our suggestion -40 ℃～85 ℃ for long time.
7.In principle, please do not use it when the relay has fallen down.
8.Neptune products are all RoHS2.0 compliant.
9. Neptune reserves the right to change the product. Customers should confirm the version of the specification before purchasing the product.
10. Please contact Neptune Electric (Kunshan) Co., Ltd for more information or support.